4.3
Connecting to a Network
Your RamSan-810 includes 1 Gigabit Ethernet port for remote management over a network. You
can use this connection to configure the storage and management features.
Figure 4: Gigabit Ethernet Port Location
4.4
Connecting Power to the System
A fully loaded RamSan-810 requires approximately 250 watts of power typically. It contains
redundant power supplies that are hot-swappable. Using the AC power cords provided, connect
each power module to a power source. Install the socket outlet in an easily accessible location
near the equipment.
As a best practice, connect each of the RamSan-810 power cords to separate circuits.
Figure 5: RamSan-810 Power Supply
5
Getting Started
This chapter will guide you through setting up your RamSan-810. It is important to accomplish
the following tasks to make your system usable:
RamSan-810 User’s Manual
- 9 -
Texas Memory Systems, Inc.
