![background image](http://html1.mh-extra.com/html/texas-instruments/tms320dm36-series/tms320dm36-series_user-manual_1095290077.webp)
www.ti.com
MDIO Registers
4.9
MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET)
The MDIO user command complete interrupt mask set register (USERINTMASKSET) is shown in
Figure 34
and described in
Table 31
.
Figure 34. MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET)
31
16
Reserved
R-0
15
2
1
0
Reserved
USERINTMASKSET
R-0
R/W1S-0
LEGEND: R = Read only; R/W = Read/Write; W1S = Write 1 to set, write of 0 has no effect; -n = value after reset
Table 31. MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET)
Field Descriptions
Bit
Field
Value
Description
31-2
Reserved
0
Reserved
1-0
USERINTMASKSET
0-3h
MDIO user interrupt mask set for USERINTMASKED[1:0], respectively. Setting a bit to 1 will
enable MDIO user command complete interrupts for that particular USERACCESS register.
MDIO user interrupt for a particular USERACCESS register is disabled if the corresponding bit
is 0. USERINTMASKSET[0] and USERINTMASKSET[1] correspond to USERACCESS0 and
USERACCESS1, respectively. Writing a 0 to this register has no effect.
0
MDIO user command complete interrupts for the MDIO user access register n
(USERACCESSn) are disabled.
1
MDIO user command complete interrupts for the MDIO user access register n
(USERACCESSn) are enabled.
77
SPRUFI5B – March 2009 – Revised December 2010
Ethernet Media Access Controller (EMAC)/Management Data Input/Output
(MDIO)
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated