![background image](http://html1.mh-extra.com/html/texas-instruments/tms320c645x/tms320c645x_user-manual_1095285114.webp)
www.ti.com
5.14
SERDES Transmit Channel Configuration Registers n (SERDES_CFGTXn_CNTL)
SRIO Registers
There are four of these registers, to support four ports.
Figure 70. SERDES Transmit Channel Configuration Registers n (SERDES_CFGTXn_CNTL)
31
17
16
Reserved
ENFT
P
R-0
R/W-0
15
12
11
9
8
7
6
5
4
2
1
0
DE
SWING
CM
INVPA
RATE
BUSWIDTH
Reserv
ENTX
IR
ed
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
LEGEND: R = Read, W = Write, n = value at reset
Table 42. SERDES Transmit Channel Configuration Registers n (SERDES_CFGTXn_CNTL) Field
Descriptions
Bit
Field
Value
Description
31:17
Reserve
Reserved.
d
16
ENFTP
Enable fixed TXBCKLINn phase. Enables fixed phase relationship of TXBCLKINn with respect to
TXBCLKn.
0
Arbitrary phase. No required phase relationship between TXBCLKINn and TXBCLKn.
1
Fixed phase. Requires direct connection of TXBCLKn to TXBCLKINn using a minimum length net
without buffers.
15:12
DE
De-emphasis. Selects one of 15 output de-emphasis settings from 4.76 to 71.42%. See
Table 44
.
11:9
SWING
Output swing. Selects one of 8 outputs amplitude settings between 125 and 1250mV
dfpp
. See
Table 43
.
8
CM
Common mode. Adjusts the common mode to suit the termination at the attached receiver.
0
Normal common mode. Common mode not adjusted.
1
Raised common mode. Common mode raised by 5% of e
54
.
7
INVPAIR
Invert polarity. Inverts polarity of TXPn and TXNn.
0
Normal polarity. TXPn considered to be positive data and TXNn negative.
1
Inverted polarity. TXPn considered to be negative data and TXNn positive.
6:5
RATE
Operating rate. Selects full, half or quarter rate operation.
00
Full rate. Two data samples taken per PLL output clock cycle.
01
Half rate. One data sample taken per PLL output clock cycle.
10
Quarter rate. One data sample taken every two PLL output clock cycles.
11
Reserved
4:2
BUS-
Bus width. Selects the width of the parallel interface (10 or 8 bit).
WIDTH
000
10-bit operation. Data is input on TDn[9:0]. TXBCLKn period is 10 bit periods (4 high, 6 low).
001
8-bit operation. Data is input on TDn[9:2]. TXBCLKn period is 8 bit periods (4 high, 4 low). TDn[1:0]
are ignored.
01x
Reserved
1xx
Reserved
1
Reserve
Reserved
d
0
ENTX
Enable transmitter. Enables this transmitter when high.
Serial RapidIO (SRIO)
114
SPRU976 – March 2006
Submit Documentation Feedback