![background image](http://html1.mh-extra.com/html/texas-instruments/tms320c645x/tms320c645x_user-manual_1095285112.webp)
www.ti.com
5.13
SERDES Receive Channel Configuration Registers n (SERDES_CFGRXn_CNTL)
SRIO Registers
There are four of these registers, to support four ports.
Figure 69. SERDES Receive Channel Configuration Registers n (SERDES_CFGRXn_CNTL)
31
26
25
24
23
22
19
18
16
Reserved
Reserv Reserv Reserv
EQ
CDR
ed
ed
ed
R-0
R/W-0
R/W-0
R-0
R/W-0
R/W-0
15
14
13
12
11
10
8
7
6
5
4
2
1
0
LOS
ALIGN
Reserv
TERM
INVPA
RATE
BUSWIDTH
Reserv
ENRX
ed
IR
ed
R/W-0
R/W-0
R-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
LEGEND: R = Read, W = Write, n = value at reset
Table 40. SERDES Receive Channel Configuration Registers n (SERDES_CFGRXn_CNTL) Field
Descriptions
Bit
Field
Value
Description
31:26
Reserved
Reserved.
25
Reserved
Reserved, keep as zero during writes to this register.
24
Reserved
Reserved, keep as zero during writes to this register.
23
Reserved
Reserved.
19:22
EQ
Equalizer. Enables and configures the adaptive equalizer to compensate for loss in the
transmission media. For values, see
Table 41
.
18:16
CDR
Clock/data recovery. Configures the clock/data recovery algorithm.
000
First order. Phase offset tracking up to
±
488 ppm.
001
Second order. Highest precision frequency offset matching but poorest response to changes in
frequency offset, and longest lock time. Suitable for use in systems with fixed frequency offset.
010
Second order. Medium precision frequency offset matching, frequency offset change response
and lock time.
011
Second order. Best response to changes in frequency offset and fastest lock time, but lowest
precision frequency offset matching. Suitable for use in systems with spread spectrum clocking.
100
First order with fast lock. Phase offset tracking up to
±
1953 ppm in the presence of ..10101010..
training pattern, and
±
448 ppm otherwise.
101
Second order with fast lock. As per setting 001, but with improved response to changes in
frequency offset when not close to lock.
110
Second order with fast lock. As per setting 010, but with improved response to changes in
frequency offset when not close to lock.
111
Second order with fast lock. As per setting 011, but with improved response to changes in
frequency offset when not close to lock.
15:14
LOS
Loss of signal. Enables loss of signal detection with 2 selectable thresholds.
00
Disabled. Loss of signal detection disabled.
01
High threshold. Loss of signal detection threshold in the range 85 to 195mV
dfpp
. This setting is
suitable for Infiniband.
10
Low threshold. Loss of signal detection threshold in the range 65-175mV
dfpp
. This setting is
suitable for PCI-E and S-ATA.
11
Reserved
13:12
ALIGN
Symbol alignment. Enables internal or external symbol alignment.
00
Alignment disabled. No symbol alignment will be performed while this setting is selected, or when
switching to this selection from another.
01
Comma alignment enabled. Symbol alignment will be performed whenever a misaligned comma
symbol is received.
10
Alignment jog. The symbol alignment will be adjusted by one bit position when this mode is
selected (i.e., CFGRX[13:12] changes from 0x to 1x).
11
Reserved
112
Serial RapidIO (SRIO)
SPRU976 – March 2006
Submit Documentation Feedback