Tews Technologies TPMC851, User Manual

Page: 15 / 65

Bit Symbol Description Access Reset
Value
4:0 CS[4:0] Channel Select (Analog Input Channel)
CS[4:0]
Single-ended
Channel
SE/DIFF = 0
Differential Channel
SE/DIFF = 1
00000 CH1 CH1
… … …
01111 CH16 CH16
10000 CH17 N/A
… … …
11111 CH32 N/A
‘N/A’ = ADC Input connected to GND
R/W 00000
Table 3-4 : ADC Control Register
A write to this register sets the new channel and gain. Subsequent write accesses are ignored until the
settling time has elapsed. This register is developed for a word (16 bit) or long word (32 bit) read/write
access. Byte accesses on this register are not supported and will fail.
Do NOT write to this register while the sequencer is running! A write to this register while the sequencer
is running can lead to unpredictable results!
Interrupts are generated only if the Master Interrupt Enable (MIE) is enabled in the Interrupt Control
Register ICR.
TPMC851 User Manual Issue 1.0.9 Page 15 of 65