Tews Technologies TPMC682-10 User Manual Download

Page: 2 / 36

TPMC682 User Manual Issue 1.1

Page 2 of 36

TPMC682-10

3 x 16 bit I/O Ports with
512 Word FIFO and Handshake

HD68 front panel connector

P14 Back I/O

This document contains information, which is
proprietary to TEWS TECHNOLOGIES GmbH. Any
reproduction without written permission is forbidden.

TEWS TECHNOLOGIES GmbH has made any
effort to ensure that this manual is accurate and
complete. However TEWS TECHNOLOGIES GmbH
reserves the right to change the product described
in this document at any time without notice.

TEWS TECHNOLOGIES GmbH is not liable for any
damage arising out of the application or use of the
device described herein.

Style Conventions

Hexadecimal characters are specified with prefix 0x,
i.e. 0x029E (that means hexadecimal value 029E).

For signals on hardware products, an ‚Active Low’ is
represented by the signal name with # following, i.e.
IP_RESET#.

Access terms are described as:

W Write

Only

R Read

Only

R/W Read/Write

R/C Read/Clear

R/S Read/Set



2005-2006 by TEWS TECHNOLOGIES GmbH

Summary of Contents for TPMC682-10





































Search results

Summary of Contents for TPMC682-10

Reviews:

Related manuals for TPMC682-10

Brands by name

Popular brands

Tews Technologies TPMC682-10, User Manual

Search results

Summary of Contents for TPMC682-10

Reviews:

Related manuals for TPMC682-10

Brands by name

Popular brands