50
tesVolt battery monItorIng software – batmon
© TESVOLT We reserve the right to make technical changes! RD.TI.026.E.ENG_Installation_Manual_TSHV70OD_v.B.01 Last revised 01/2021
11 TESVOLT BATTERY MONITORING SOFTWARE – BATMON
11.1 VIEWS AND FUNCTIONS
TESVOLT BatMon is a piece of software that can be used to analyse and visualise batteries right down
to the cell level.
NOTE:
The software can be found on the supplied TESVOLT USB-Stick
11
and must be installed in a writable
directory on the “C:” drive, for start-up. The installation path suggested by the installation program
must not be changed.
To obtain insights into the battery with the BatMon software, the service laptop’s LAN connection must
be connected to the LAN 2 switch (also see “7.1 System structure” on page 33).
After installation, launch the file “BatMon.exe”. Tick all the boxes in the firewall query about full access
to the network. The “System” menu item at the bottom of the BatMon BatMon interface includes a
“Communication Port” button. The serial number and the IP address of the master APU HV1000-S
must be selected here under “Select APU” (this information can be found on a sticker on the underside
of the APU HV1000-S casing).
Figure 11.1 Screen for setting the network configuration
NOTE:
If the configuration is correct and the battery is successfully connected, a continuous green circle and
the “online” display area will appear in the bottom right-hand corner of the BatMon interface.
