TESTING 1.0206.07, Operating Instructions Manual

Page: 12 / 50

Laboratory mortar mixer
1.0206.07
4.5 General safety instructions
Warning
All of the instructions must be read. Failure to comply with the instru
tions that are described below could cause electric shocks, fires
1) The workplace
•
Keep your working area clean and tidy.
lead to accidents.
•
Do not work with the mortar mixer in potentially explosive environments in which
flammable liquids, gasses or dusts are present. Power tools create sparks that
could ignite dust or vapours.
•
Keep children and other persons away from the device while it is in use. You
could lose control over the device if you are distracted.
2) Electrical safety
•
The connecting plug of the mortar mixer (CEE/ 16A) must fit into the correspon
ing socket. The plug must no
plugs together with the protected earthed devices. Unaltered plugs and correctly
fitting sockets will reduce the risk of an electric shock.
• Avoid any body contact with earthed surfaces such as pipes, heating
stoves and refrigerators. There is a higher risk of electric shock when your body
is earthed.
•
Keep the device away from rain or moisture. Water penetrating into the electric
device will increase the risk of an electric shock.
•
Do not misuse or misa
device up or use it to pull the plug out of the socket. Keep the cable away from
heat, oil, sharp edges and moving machinery parts. Damaged or tangled cables
increase the risk of an electric shock
3) The safety of personnel
•
Be attentive and pay attention to what you are doing and work with prudence
when at work. Do not use the device when you are tired or if you are under the
influence of drugs, alcohol or medication. One moment of carelessness w
ing the device can lead to serious injuries.
•
Wear personal protective equipment and always wear protective googles. Wea
ing personal protective equipment such as dust masks and non
will reduce the risk of injuries.
•
Remove any installation tools or spanners before switching the mortar mixer on.
A tool or spanner that is located in a part of the device that rotates could lead to
injuries.
12
y instructions
All of the instructions must be read. Failure to comply with the instru
tions that are described below could cause electric shocks, fires
and/or serious injuries.
Keep your working area clean and tidy. Disorder and unlit working areas could
Do not work with the mortar mixer in potentially explosive environments in which
flammable liquids, gasses or dusts are present. Power tools create sparks that
could ignite dust or vapours.
ldren and other persons away from the device while it is in use. You
could lose control over the device if you are distracted.
The connecting plug of the mortar mixer (CEE/ 16A) must fit into the correspon
ing socket. The plug must not be altered in any way. Do not use any adapter
plugs together with the protected earthed devices. Unaltered plugs and correctly
fitting sockets will reduce the risk of an electric shock.
Avoid any body contact with earthed surfaces such as pipes, heating
stoves and refrigerators. There is a higher risk of electric shock when your body
Keep the device away from rain or moisture. Water penetrating into the electric
device will increase the risk of an electric shock.
Do not misuse or misappropriate the cable in order to carry the device, hang the
device up or use it to pull the plug out of the socket. Keep the cable away from
heat, oil, sharp edges and moving machinery parts. Damaged or tangled cables
increase the risk of an electric shock.
Be attentive and pay attention to what you are doing and work with prudence
when at work. Do not use the device when you are tired or if you are under the
influence of drugs, alcohol or medication. One moment of carelessness w
ing the device can lead to serious injuries.
Wear personal protective equipment and always wear protective googles. Wea
ing personal protective equipment such as dust masks and non
will reduce the risk of injuries.
lation tools or spanners before switching the mortar mixer on.
A tool or spanner that is located in a part of the device that rotates could lead to
All of the instructions must be read. Failure to comply with the instruc-
tions that are described below could cause electric shocks, fires
Disorder and unlit working areas could
Do not work with the mortar mixer in potentially explosive environments in which
flammable liquids, gasses or dusts are present. Power tools create sparks that
ldren and other persons away from the device while it is in use. You
The connecting plug of the mortar mixer (CEE/ 16A) must fit into the correspond-
t be altered in any way. Do not use any adapter
plugs together with the protected earthed devices. Unaltered plugs and correctly
Avoid any body contact with earthed surfaces such as pipes, heating systems,
stoves and refrigerators. There is a higher risk of electric shock when your body
Keep the device away from rain or moisture. Water penetrating into the electric
ppropriate the cable in order to carry the device, hang the
device up or use it to pull the plug out of the socket. Keep the cable away from
heat, oil, sharp edges and moving machinery parts. Damaged or tangled cables
Be attentive and pay attention to what you are doing and work with prudence
when at work. Do not use the device when you are tired or if you are under the
influence of drugs, alcohol or medication. One moment of carelessness when us-
Wear personal protective equipment and always wear protective googles. Wear-
ing personal protective equipment such as dust masks and non-slip safety boots
lation tools or spanners before switching the mortar mixer on.
A tool or spanner that is located in a part of the device that rotates could lead to