TESTING 1.0206.07, Operating Instructions Manual

Page: 5 / 50

Laboratory mortar mixer
1.0206.07
5
1 Receipt, transport
1.1 Receipt
Check the external visible condition of the delivered shipment. If the delivered product is
in good condition, the shipment can then be accepted from the forwarding agent (parcel
service or carrier).
If there is no complaint or transport damage, check the completeness of the shipment
against the delivery note.
If transport damage is detected after receipt, a report with an exact survey of the degree
of damage with a photo must be created immediately. Forward the report to us immedi-
ately by fax. Please do not make any alterations to the delivered shipment.
Using this report, we should be able to assess whether the damage can be fixed
– by the supply of replacement parts
– by sending a specialist for assembly, or only
– by returning the device.
1.2 Transport
The mortar mixer is delivered in suitable cardboard packaging upright on a pallet.
The mortar mixer’s weight is approx. 62 kg.
The mortar mixer can be left in the delivery packaging and transported to its destination
using a forklift or another suitable industrial truck capable of grasping underneath the
pallet.
Ropes or similar lifting gear may only be attached if it has been ensured that no lateral
forces are applied to the packaging and thus possibly to parts of the mortar mixer as
well.
1.3 Remove the transport packaging
To remove the transport packaging, proceed as follows:
•
Open the transport packaging’s cover
•
Remove the cardboard or Styrofoam transport securing device (inlays)
•
Cut open the sidewalls end-to-end at the vertical edges
•
Cut off the side walls at the horizontal bottom edges
•
Remove the cardboard with the sand inlet