TESTING 1.0206.07, Operating Instructions Manual

Page: 10 / 50

Laboratory mortar mixer
1.0206.07
10
4.2 Improper usage
The mortar mixer may only be used in a technically flawless condition.
Use the mortar mixer only for the described applications. Improper usage will void the
warranty.
Manipulations and modifications to the mortar mixer (electrical, mechanical changes,
etc.) that have not been approved in writing by the manufacturer shall be deemed inad-
missible, and the manufacturer shall accept no claims for damages.
We recommend using only original replacement and accessory components; if this is
not the case, then the manufacturer shall accept no liability.
Ensure that no dangerous situations arise during the work. Switch the mortar mixer off
immediately if it is not functioning correctly and inform the manufacturer or the distribu-
tor’s authorised service personnel immediately.
The following usage is deemed improper and thus prohibited:
•
Mixing of substances other than those specified under 4.1
•
Filling and processing of food
•
Overfilling the mixing bowl
•
Setting up and operating the mixer in environmental conditions other than those
named under 6.1
4.3 Information about the CE marking
TESTING Bluhm & Feuerherdt GmbH testing equipment carry the CE marking.
The CE marking confirms that the product conforms to the EC Directives that must be
taken into account for the product and that the product complies with the ‘essential re-
quirements’ defined therein and the defined general relevant level of protection. The
conformity-assessment procedure has in each case been carried out in accordance with
the applicable EC Directives. Decisive here is Council Decision 93/465/EEC on the
modules to be used in the technical harmonization directives for the various phases of
the conformity-assessment procedure and the regulations for the affixing and use of the
CE marking.