Terumo BCT Trima Accel, Service Manual

Page: 308 / 340

The Trima Accel system is intended for use in the electromagnetic environment specified below. The customer or the user of
the Trima Accel system should ensure that it is used in such an environment. The term “emissions” refers to the effects that
the Trima Accel system machine can have on other devices in its vicinity. Based on the emissions testing listed below, the
Trima Accel system should not interfere with typical mobile devices such as mobile cell phones or portable
media/communication devices.
Table 6-4: EMC emissions guidance
Emissions Test Compliance
Electromagnetic Environment—
Guidance
RF emissions
CISPR 11
Group 1 The Trima Accel system uses high frequencies
only for its internal function (e.g., computer
timing signals and internal communication).
The RF emissions meet the requirements of
CISPR 11. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
RF emissions
CISPR 11
Group 2 The Trima Accel system emits RF for the
Seal Safe accessory in order to perform its
intended function. This is only when sealing or
cutting are performed. Nearby electronic
equipment may be affected.
RF emissions
CISPR 11
Class A The Trima Accel system is suitable for use in
all establishments other than residential and
those directly connected to the public low-
voltage power supply network that supplies
buildings used for residential purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Complies
Electrical Power and Safety
Trima Accel
®
Automated Blood Collection System • Service Manual 6-5