Terumo BCT Trima Accel, Service Manual

Page: 244 / 340

RBC PTF Setup 2 Substate
Table 3-182: RBC PTF Setup 2 Substate
AC Pump
(mL/min) Inlet Pump
(mL/min)
Plasma
Pump
(mL/min)
Platelet
Pump
(mL/min)
Return
Pump
(mL/min)
Platelet
Valve
Plasma
Valve
RBC
Valve
Centrifuge
(rpm)
Qac Qin Qplas Qplat Qret Return Return Return Qcent
Exit Condition When the target volume is processed by the inlet pump.
RBC Collect (RBC Collection) Substate
If RBC collection is chosen, this substate occurs after all platelets and plasma are collected. The RBC
valve opens until the RBC volume target is achieved. The inlet flow is limited by the configured AC ratio
for RBC procedures.
Table 3-183: RBC Collect Substate
AC Pump
(mL/min) Inlet Pump
(mL/min)
Plasma
Pump
(mL/min)
Platelet
Pump
(mL/min)
Return
Pump
(mL/min)
Platelet
Valve
Plasma
Valve
RBC
Valve
Centrifuge
(rpm)
Qac Qin Qplas Qplat Qret Return Return Collect Qcent
Exit Condition When the target (donor-specific) volume is collected in the RBC bag.
Pre Rinseback (Prepare for Rinseback) Substate
This substate occurs in both platelet/plasma/RBC procedures and DRBC procedures. All valves move to
the return position and all pumps are commanded to zero. When these actions successfully complete,
the Trima Accel system advances to the Blood Rinseback state.
Table 3-184: Pre Rinseback Substate
AC Pump
(mL/min) Inlet Pump
(mL/min)
Plasma
Pump
(mL/min)
Platelet
Pump
(mL/min)
Return
Pump
(mL/min)
Platelet
Valve
Plasma
Valve
RBC
Valve
Centrifuge
(rpm)
0 0 0 0 0 Return Return Return Qcent
Exit Condition When the pumps and valves are detected at the commanded speed and position within 10
seconds.
Version 6.1 Software Description
Trima Accel
®
Automated Blood Collection System • Service Manual 3-111