Terumo BCT Trima Accel, Service Manual

Page: 18 / 340

Table 1-2: Trima Accel system components
Component Function
1 Centrifuge motor Spins the disposable tubing set channel that is used to separate blood into its
components.
2 E-box Contains CCAs for the safety and control systems, the hard drive, the motor drive
systems, and the power supply.
3 Lower compartment
cooling (fan 1) Provides airflow that is used to cool the centrifuge motor and basin.
4 Upper compartment
cooling (fan 2) Provides airflow that is used to cool the pump and valve motors.
5 E-box cooling (fan 3) Provides airflow that is used to cool the e-box electronics.
6 Linear actuator screw Raises or lowers the cassette plate when the motor is activated.
7 Leak detector CCA Contains the leak detector circuitry.
8 Top cap assembly Contains the display arm assembly, the handle, the Seal Safe connector, and the
barcode reader connector and interfaces with the IV pole. This is a replaceable
component.
9 ESD service strap Provides a secondary ESD (electrostatic discharge) strap if the service
technician does not have a primary ESD strap.
System Directory
Trima Accel
®
Automated Blood Collection System • Service Manual 1-9