Terumo BCT Trima Accel, Service Manual

Page: 270 / 340

Valve System Connection Failures
This section describes common connection problems to check for in the valve system.
Table 4-5: Possible valve connection failures
Connection Possible Connection Error
Cassette position sensors Ensure that the raised and lowered cassette position sensors are plugged in to
the valve CCA whenever the valve assembly has been removed from the device.
As viewed from the rear of the device:
Valve assembly cable to the e-box Plugging the valve assembly cable into the display cable connection on top of
the e-box will damage the display when the device power is turned on. Ensure
the proper connection, as the valve and display connectors are NOT keyed
differently to prevent this confusion.
Figure 4-5: Valve harness to e-box connection
Valve System Troubleshooting
Trima Accel
®
Automated Blood Collection System • Service Manual 4-9