background image

31

GB

Terma

Cook

       Operation

Cookware for induction hobs

Cookware for induction cooking zones must be made of metal
and have magnetic properties. The base must be sufficiently
large.

Only use pots with a base suitable for induction.

This is how to establish the suitability of a pot

Conduct the magnet test described below or make sure that the
pot bears the symbol for suitability for cooking with induction
current.

Magnet test

Move a magnet towards the 
base of your cookware. If it is
attracted, you can use the 
cookware on the induction 
hob.

Important

When using pans suitable for induction from certain manufactu-
rers, noises may occur which are attributable to the design of 
these pans.

Wrong:

 the base of the pan is curved. The electronic unit cannot

determine the termperature correctly.

Right:

 suitable cookware! 

How to cut power consumption

The following are a few useful hints to help you cut your consump-
tion of energy and use your new induction hob and the cookwa-
re efficiently.
 

·  The base of your cooking pots should be the same size as   

 

  the cooking zone.

 

·  When buying cooking pots, note that it is frequently the

 

   diameter of the top of the pot that it indicated. This is usually

 

  larger than the base of a pot.

 

·  Pressure cookers are particularly low on energy and time

 

  required thanks to the pressure and the fact that they are

 

  tightly closed. Short cooking times mean that vitamins are

   preserved.

 

·  Always make sure that there is sufficient fluid in your pressure

 

  cooker since the cooking zone and the cooker may be

 

  damaged as a result of overheating if the pressure cooker

 

  boils dry.

 

·  Always close cooking pots with a suitable lid.

 

·  Use the right pot for the quantity of food you are cooking.

 

  A large pot which is hardly filled will use up a lot of energy.

Power settings

The heating power of the cooking zones can be set at various
power levels. In the chart you will find examples of how to use
each setting.

A higher power level may need to be selected for cooking pots
without a lid.

Residual heat display

The glass ceramic hob is equipped with an H as a residual 
heat display.

As long as the H lights up after the cooking zone has been swit-
ched off, the residual heat can be used for melting food or for 
keeping food warm.

The cooking zone may still be hot when the letter H no longer
lights up. Risk of burns!

The glass ceramic is not directly heated in the case of an
induction cooking zone; it is only heated up by heat reflected by
the pan.

Suitable cookware

Unsuitable cookware

Enamelled steel pots with a 

thick base

Pots made of copper,

stainless steel, aluminium,

oven-proof glass, wood, 

ceramic and terracotta

Cast iron pots with an ena-

melled base

Pots made of multi-layer

stainless steel, stainless ferrite

steel and aluminium with 

special base

ideal

unsuitable

unsuitable

unsuitable

Setting

Suitable for

0

1-2

3

4-5

6

7-8

9
P

Off, using remaining heat
Simmering small portions

(lowest setting)

Simmering
Simmering larger quantities or roasting
larger pieces of meat until they are
cooked through
Roasting, getting juices
Roasting
Bringing to the boil, browning, roasting
ower setting 

(highest power output)

Summary of Contents for Integral 800

















































Reviews: