Operator's Manual
First Edition • Third Printing
Operating Instructions
54
SX
™
-105 XC
™
• SX
™
-125 XC
™
Part No. 1270327GT
Standstill Regeneration
When the LCD screen displays the message
"Regen Required" and the Regeneration lamp is
flashing, the DPF (Diesel Particulate Filter)
requires a Standstill Regeneration.
During the DPF standstill generation process,
all boom functions are disabled.
Keep clear of the engine exhaust and muffler.
Don't leave the machine unattended.
The DPF standstill regeneration cannot be
activated if not requested by the engine, or in
the presence of some engine faults.
If the standstill regeneration request is
ignored, the soot in the DPF can reach
extreme levels. The filter will be permanently
damaged and will have to be replaced by a
qualified service technician.
Under emergencies, the DPF standstill
regeneration can be interrupted in two ways:
The engine is turned off by the key switch.
The ESTOP stop button is pushed.
If this occurs, the standstill regeneration may
need to be restarted.
The DPF standstill regeneration cannot begin
until the engine has been run for at least two
minutes and the coolant temperature has
reached 35°C.
To start the regeneration, proceed as follows.
1
Close the engine side cover.
2
Select a safe parking location
—firm and level,
clear of obstructions and traffic, clear of
flammable material and clear of explosive
gasses.
3
Simultaneously press the 2
LCD screen control buttons
shown.
4
Press the LCD screen control button
until DEUTZ 2.2 STANDSTILL
REGEN is displayed.
5
Press the LCD screen control button
shown to select YES.
6
The LCD screen displays the message
WARNING HIGH EXHAUST TEMP, PRESS
ENTER.
7
Press the LCD screen control button
shown.
Summary of Contents for Genie SX-105 XC
Page 76: ......
