Terex Genie SX-105 XC, Operator'S Manual

Page: 24 / 76

Operator's Manual
First Edition • Third Printing
Controls
22 SX
™
-105 XC
™ • SX ™
-125 XC
™
Part No. 1270327GT
Ground Control Panel
1 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
2 Function speed select buttons
Push the function speed select button to select
function speed. When the arrow above the
turtle is lit, machine functions will operate at
slow speed. When the arrow above the rabbit
is lit, machine functions will operate at fast
speed.
3 Key switch for off/ground/platform selection
Turn the key switch to the off position and the
machine will be off. Turn the key switch to the
ground position and the ground controls will
operate. Turn the key switch to the platform
position and the platform controls will operate.
4 Engine start button
Press the engine start button to start the
engine.
5 Jib boom up button
Press the jib boom up button and the jib boom
will raise.
6 Platform level up button
Press the platform level up button and the
level of the platform will raise.
7 Platform level down button
Press the platform level down button and the
level of the platform will lower.
8 Jib boom down button
Press the jib boom down button and the jib
boom will lower.
9 20A circuit breaker for system circuit
10 Alarm
11 Bypass/recovery key switch
Bypass key position to be used only to level
the platform if the ground control display
shows platform out of level (P22) and platform
level controls do not work. Refer to the
operating instructions.
Recovery key position should be used only by
trained and authorized personnel.
12 Platform rotate right button
Press the platform rotate right button and the
platform will rotate to the right.
13 Platform rotate left button
Press the platform rotate left button and the
platform will rotate to the left.
14 Emergency power button
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
button and activate the desired function.
15 Turntable rotate left button
Press the turntable rotate left button and the
turntable will rotate left.