51/65
2.3
.
Remove 2pcs COUNT SUNK SCREW M5X18.5 at the center of brush motors
2.4. Remove the DRIVING WHEEL BOTTOM
2.5. Remove the BRUSH UNIT BOTTOM PART by unscrewing the SCREWS SOCKET HEAD CAP
M5X10 with attention to the LOCTITE 222
2.6. Remove the BRUSH UNIT BOTTOM PART
2.7. Remove the TRANSPORT WHEEL PILLAR from his own seat on the BRUSH MOTOR
CONSTRUCTION COVER by unscrewing the 2 SCREWS COUNTER SUNK M6X16 with
attention that they have been dipped in the LOCTITE 222
2.8. Replace the TRANSPORT WHEEL PILLAR and put the 2 SCREWS COUNTER SUNK M6X16 after
having them dipped in the LOCTITE 222
51-1
51-2
51-4
51-3
51-5
51-6
Summary of Contents for i-team i-mop xxl
