25/65
11. Fix the four input cables to the MACHINE BATTERY CONTROL PCB ASSY following the scheme of the
pictures below
12. Fix the seven output cables to the MACHINE BATTERY CONTROL PCB ASSY following the scheme of
the pictures below
13. Put a small piece of HEAT SHRINK TUBING through the UTP CABLE, then joint the connector to the
MACHINE BATTERY CONTROL PCB ASSY, block the UTP CABLE with a CABLE TIE 3X15, remove
the residue of tie via diagonal cutting pliers
25-2
25-1
25-4
25-5
25-3
25-7
25-6
Summary of Contents for i-team i-mop xxl
