Tennant i-team i-mop xxl, Service Manual

Page: 60 / 64

60/65
6. Cover the soldering with the heat shrinkable tubing and heaten it to shrink it.
7. Put the fuse into its seat in the BATTERY PACK CELLS.
8. Close the ASSY BATTERY PACK with the BATTERY PACK HOUSING TOP.
9. Screw the two BATTERY PACK HOUSINGS with 4 SCREW WN 5451 25X10 EJOT DELTA PT
10. Testing procedure of Battery
Measure the Voltage of Battery via Voltage meter or Multiple meter by insert the red wire to the hole
with “+” mark and black wire to the “-” mark
A, If the reading of Voltage is with minus, this is the plus and minus was installed incorrectly
and will damage the main PCB if insert this kind of battery to machine
B. If the reading is Zero, the insert fuse is broken and need be replaced
C. If the reading is about 10V, the batter is possibly damaged via over-discharge.
60-1
60-2
60-3
60-4
60-5