38/65
CHAPTER 10 – I-MOP TUBES REPLACEMENT INSTRUCTIONS
1. Brush tube replacement – WATER CHANNEL Ø4 MM
1.1. Remove the 6pcs EJOT SCREW 50 X14
1.2. Remove the 2pcs COVER BRUSH MOTOR SCREW
1.3. Remove the COUNTER SUNK BOLT M5X18.5
1.4. Remove the DRIVING WHEEL BOTTOM
1.5. Remove the BRUSH UNIT BOTTOM PART by unscrewing the SCREWS SOCKET HEAD
CAP M5X10 doing attention to the LOCTITE 222
1.6. Remove the BRUSH UNIT BOTTOM PART
38-1
38-2
38-3
38-4
38-5
38-6
Summary of Contents for i-team i-mop xxl
