29/65
CHAPTER 8 – I-MOP MAIN LEVER REPLACEMENT
1. Remove the 6 pcs EJOT SCREW 50X14 which fixed the two COVER BRUSH MOTOR SCREW, then
remove the 2pcs COVER BRUSH MOTOR SCREW
2. Remove the 2pcs COUNTER SUNK BOLT M5X18.5 at the center of brush motor shaft
3. Remove the DRIVING WHEEL BOTTOM
4. Remove the BRUSH UNIT BOTTOM PART by unscrewing the SCREWS SOCKET HEAD CAP
M5X10 while paying attention to the LOCTITE 222 that was used.
5. Remove the BRUSH UNIT BOTTOM PART
29-1
29-2
29-3
29-4
29-5
29-6
Summary of Contents for i-team i-mop xxl
