Tennant i-team i-mop xxl, Service Manual

Page: 26 / 64

26/65
14. Block the UTP CABLE with a CABLE TIE 3.5X30, , remove the residue of the cable tie with a diagonal
cutting pliers.
15. Put a small piece of HEAT SHRINK TUBING around the ESD CABLE and bend it with an angle of 90°,
16. Shrink the HEAT SHRINK TUBING with a hair-dryer/hot air gun
17. Block the HEAT SHRINK TUBING with a drop of LOCTITE 502
18. Add the 3pcs Thermal Conductive Pad 14X17X2 MM onto the HEAT SINKS
26-1
26-2
26-3
26-4
26-6
26-7
26-8
26-5