Tennant 3640E, Service Manual

Page: 27 / 180

CHASSIS
2--11
3640E 330565 (5--00)
16. Reinstall the cotter pin and clevis pin into the
end of the shift cable clevis.
17. Reinstall the shift cable mount clamp on the
machine frame. Tighten the two hex screws
to 7.6 -- 9.9 Nm (6 -- 8 ft lb).
18. Make sure the upper shift lever is placed in
the PARK position. Snap the shift cable end
over the ball end on the lower shift link.
Adjust the cable end in or out as needed so
it is aligned with the ball end on the link.
Re--tighten the jam nut against the cable
ball end.
19. Reinstall the left side handle assembly cover
plate. Tighten the three hex screws to
18 -- 24 Nm (15 -- 20 ft lb).