Tennant 3640E, Service Manual

Page: 114 / 180

SWEEPING
3--64
3640E 330565 (5--00)
4. Remove the seven plastic rivets holding the
right dust seal to the inside of the brush
compartment.
5. Use a pliers or side cutter to remove the
center pin out of the plastic rivet. Lift the
body of the rivet out of the hole. Repeat this
on all rivets.
6. Remove the old seal from the machine.
7. Remove the small cap retainer holding the
inside plate to the right seal. Remove the
inside plate and install it on the new right
seal in the same orientation. Reinstall the
small cap retainer.
8. Install the new right dust seal and plate
assembly on the machine. Line up the holes
in the new seal with the mount holes in the
machine frame.