OPERATION
2Ć17
186E MM160 (6–94)
DOUBLE SCRUBBING OPERATION
Double scrubbing is a method of removing heavy
accumulations of soilage, dirt, wax, or spills. It
involves making two passes over the area to be
cleaned. To double scrub, make a single pass
over the surface being cleaned with the rear
squeegee raised. Allow the solution to soak on
the floor for 15 to 20 minutes. Then make a
second scrubbing pass in the normal manner with
the rear squeegee lowered.
FOR SAFETY: When Using Machine; Go Slow
On Grades And Slippery Surfaces.
OPERATION ON GRADES
Drive the machine slowly on grades. The
maximum rated climb angle is 8 degrees. The
maximum rated descent angle is 6 degrees.
FOR SAFETY: When Using Machine; Go Slow
On Grades And Slippery Surfaces.
VACUUM WAND OPTION
The vacuum wand option gives the machine the
added flexibility of picking up debris not
accessible to the machine. An 84 in (2135 mm)
hose utilizes the machine vacuum system.
TO OPERATE VACUUM WAND
1. Stop the machine close to the area to be
cleaned.
2. Raise the main brush and side brush.
3. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
4. Remove the vacuum wand and hose from its
storage location.
5. Assemble the vacuum wand to the vacuum
hose.
A
B
07127
VACUUM WAND
A. Vacuum Hose
B. Storage Bin
6. Turn on the machine.
7. Turn on the vacuum fan switch.
8. Vacuum the area as required.
9. When finished, turn off the machine and
vacuum fan.
10. Disassemble the vacuum wand and hose.
Place them in their storage locations.
