OPERATION
186E MM160 (6–94)
2Ć16
3. Replace the hose on the retention plug after
the tank is empty.
4. Lift the debris tray handle off its hanger and
pull the tray out from under the solution
tank. Empty and replace it.
A
B
03149
REMOVING DEBRIS TRAY
A. Handle
B. Debris Tray
POST OPERATION CHECKLIST – MOTOR
OPERATING
Check scrub brush pattern for width and
evenness.
Check squeegees for proper deflection.
TO STOP MACHINE
1. Move the solution lever into the off position
and place the main brush lever into the
(Main Brush Up) position 10 ft (3050 mm)
before stopping the machine.
2. Lift the squeegee lever into the up position.
3. Place the solution spreader tube in the up
position.
4. Pull the side brush arm into the raised
position.
5. Turn the on-off switch key to the left.
Remove the key from the on-off switch.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine And Remove
Key.
NOTE: For machines serial number 004369 and
above, the filter shaker by-pass switch should be
in the “off” position to prevent the filter shaker
from shaking.
POST OPERATION CHECKLIST – MOTOR
STOPPED
Check skirts for damage, wear, and adjustment.
Check for wire or string tangled on brushes.
Drain and clean recovery tank.
Check vacuum hoses for debris or obstructions.
Check for leaks.
