MAINTENANCE
186E MM160 (6–94)
3Ć42
REAR SQUEEGEE
The rear squeegee channels water into the
vacuum fan suction. The front squeegee blade
channels the water,and the rear blade wipes the
floor. Check the rear squeegee assembly for
damage, wear, and adjustment daily.
Rotate or replace the rear blade of the rear
squeegee if its leading edge is worn one-half of
the way through the thickness of the blade.
The rear blade has four wiping edges. To use
them all, start with one wiping edge. To use the
next wiping edge, swap the squeegee
end-for-end. To use the next wiping edge, rotate
the top edges down, bottom edges up. To use the
last edge, swap the squeegee end-for-end.
Replace the back-up strips if they become
damaged, or if they lose their resiliency.
TO REMOVE SQUEEGEE ASSEMBLY
1. Place the squeegee lever in the up position.
2. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
3. Pull the squeegee suction hose off the
recovery tank connector.
A
B
C
D
E
E
F
03162
SQUEEGEE ASSEMBLY
A. Recovery Tank
B. Drain Hose
C. Squeegee Assembly
D. Retaining Pin
E. Side Bolts
F. Squeegee Suction Hose
4. Pull the squeegee assembly retaining pin
out of the squeegee pivot pin.
5. Pull the squeegee assembly off the
squeegee mounting block.
