MAINTENANCE
3Ć21
1465/1480/1490 MM185 (9–94)
TO ADJUST SQUEEGEE DEFLECTION (for
1465 serial number 030065 and above, 1480
serial number 040161 and above, and 1490
machines)
1. Lower the rear squeegee and move the
machine forward.
2. Turn off the machine and set the machine
parking brake, if equipped.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake (If Equipped), And Turn Off Machine
And Remove Key.
3. Observe the amount of squeegee deflection.
It should deflect 0.62 in (15 mm) across its
entire width.
A
B
03719
SQUEEGEE DEFLECTION
A. Squeegee
B. Deflection
4. To increase the amount of squeegee blade
deflection, loosen the lock nut, turn the
squeegee caster height adjustment screw
clockwise, then tighten the lock nut. To
decrease the amount of squeegee blade
deflection, loosen the lock nut, turn the
squeegee caster height adjustment screw
counter-clockwise, then tighten the lock nut.
A
B
C
05489
SQUEEGEE HEIGHT ADJUSTMENT
A. Caster
B. Squeegee Caster Height
Adjustment Screw
C. Lock Nut
5. Turn on the machine, release the parking
brake (if equipped), and move the machine
forward to observe the squeegee blade
deflection. Readjust the deflection if
necessary.
NOTE: The tip curl at the ends of the squeegee
assembly may have to be readjusted after a
proper deflection has been achieved.
Summary of Contents for 1465
