OPERATION
2-17
1465/1480/1490 MM185 (11--92)
POWER WAND
The power wand uses the vacuum system and
solution system of the machine. The wand allows
scrubbing of floors which are out of reach by the
machine.
TO OPERATE THE POWER WAND
1. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake(If Equipped), Turn Off Machine And
Remove Key.
2. Remove the power wand equipment from
the machine hood.
3. Pull the squeegee vacuum hose off the rear
squeegee assembly.
A
B
04363
DISCONNECTING SQUEEGEE SUCTION
HOSE
A. Squeegee Suction Hose
B. Rear Squeegee Assembly
4. Attach the adapter to the end of the power
wand vacuum hose if not already connected.
5. Push the power wand vacuum hose onto the
squeegee vacuum hose.
6. Attach the solution hose to the
quick-disconnect on the machine.
A
B
C
08078
SOLUTION QUICK-DISCONNECT
A. Quick-disconnect
B. Rear Panel
C. Power Wand Switch
7. Attach the other ends of the solution and
vacuum hoses to the power wand tool in the
same way.
A
B
C
D
06598
CONNECTING ATTACHMENT
A. Solution Hose Quick-Disconnect
B. Vacuum Hose
C. Valve Handle
D. Selected Attachment
8. Make sure the scrub brushes are raised.
9. Press the squeegee switch to start the
vacuum fan.
10. Start the solution flow to the power wand by
placing the power wand switch in the
ON
position.
11. Squeeze the solution lever on the power
wand to spray solution on the floor. Scrub
the floor with the brush side of the cleaning
tool.
Summary of Contents for 1465
