Tennant 1465, Operator'S Manual, Page: 53 / 70

MAINTENANCE
3Ć13
1465/1480/1490 MM185 (9–91)
5. Press the spring clips together with your
thumb and index finger; press the brush
down to remove it.
B
A
04367
REMOVING SCRUB BRUSH
A. Scrub Brush
B. Brush Spring Clip
6. Slide the new scrub brushes under the scrub
brush drive assemblies.
7. Line up the scrub brush drive socket with the
drive plug.
8. Press the brush spring clip together and lift
the scrub brush into the drive plug. Release
the spring clip when the brush is in place.
9. Repeat for the other brush.
10. Check the front to back level of the scrub
head. Adjust if necessary as described in
TO LEVEL SCRUB HEAD.
11. Replace the scrub head cover.
SCRUB HEAD FLOOR SKIRT
The scrub head floor skirts control water spray
from the brushes. The scrub head side skirts are
located just in front of the front wheels. The scrub
head cover skirt is located in front of the scrub
head. Check these skirts for wear or damage after
every 25 hours of operation.
The side skirts should touch the floor when
adjusted properly. The scrub head cover skirt
should touch the floor when the scrub head is
down. Check the floor skirt for adjustment after
every 80 hours of operation.
A
B
04366
SCRUB HEAD FLOOR SKIRTS
A. Scrub Head Cover Skirt
B. Scrub Head Side Skirt