67
You can set with the multi-functional control and direction keys directly on this interface. You can also press the
corresponding soft keys of function again, when the interface below will display. To set the parameters, press
corresponding soft key, input the required value and select the unit.
Figure 4- 70 Set modulation rate
4)
Use channel output
Press CH1 on the front panel to turn on output of channel 1. The backlight of CH1 illuminates after channel output is
turned on, “ON” to the right of CH1 information tag turns white, and “OFF” is greyed out, indicating that the output of
channel 1 is turned on.
Figure 4- 71 Use channel output
