103
You can set the amplitude with the multi-functional control and direction keys. You can also press the corresponding soft
function keys again, when the interface below will display. To set the parameters, press the corresponding soft key, input
the required value and select the unit.
Figure 4- 128 Set waveform amplitude
Set starting/stop frequency, frequency sweep time, trigger source and edge.
Press SWEEP to return to the interface below after selecting frequency sweep waveform and relevant parameters:
Figure 4- 129 Set frequency sweep parameters
You can set with the multi-functional control and direction keys. You can also press the corresponding soft function keys
again, when the interface below will display. To set some parameter, press the corresponding soft key, input the required
value and select the unit.
