20
3.1.8
Set Noise Wave
Quasi-Gaussian noise with amplitude of 100mVpp and DC offset of 0mV is default in the function/arbitrary waveform
generator. If the amplitude and DC offset function of other waveforms are changed, the default value of noise wave will
also be changed. Only the amplitude and DC offset of the noise wave can be changed.
The specific steps for setting quasi-Gaussain noise with amplitude of 300mVpp and DC offset of 1V are as
follows:
Press Noise, Amp and Offset in sequence to input settings. Press the corresponding soft key to set required parameter,
input the setting value and then select the unit required.
Figure 3- 9 Set noise wave
Note: this parameter can also be set with multi-functional control and direction key.
