66
2)
Set carrier signal parameters
Press Sine to select carrier signal as a sine wave if previously set to another mode (Default carrier signal is a sine wave).
You can set with the multi-functional control and direction keys. You can also press corresponding soft keys of function
again, when the interface below will display. To set the parameters, press corresponding soft key, input the required value
and select the unit.
Figure 4- 68 Set carrier parameters
3)
Set BPSK initial phase, rate, modulation phase and PN code
Press MOD to return to the interface below after setting carrier parameters:
Figure 4- 69 Set modulation parameters
