111
Figure 4- 139 Set N cycle function
Select waveform of Burst
After setting N-cycle mode of pulse train, press Sine to select carrier signal as a sine wave if previously set to another
mode (Default carrier signal is a sine wave).
Figure 4- 140 Select waveform of pulse train
You can set amplitude with multi-functional control and direction key (note: if frequency is displayed, only frequency can
be set, which means that conversion between frequency and period cannot be realized. If frequency is displayed, period
of 2ms is corresponding to frequency of 500Hz. They are reciprocal, i.e. T=1/f). You can also press the soft function key
Freq again (press the soft key Freq twice for conversion between frequency and period in parameter list), when the
interface below will display. To set the parameters, press the corresponding soft key, input the required value and select
the unit.
