Skyworks Si5332 Manual Download | Manualshive

Page: 1 / 74

background image

Si5332 Data Sheet

6/8/12-Output Any-Frequency Clock Generator

Based on Skyworks' proprietary MultiSynth

™

flexible frequency synthesis technology,

the Si5332 generates any combination of output frequencies with excellent jitter perfor-
mance (190 fs rms). The device's highly flexible architecture enables a single device
to generate a wide range of integer and non-integer related frequencies on up to 12
differential clock outputs with 0 ppm frequency synthesis error. The device offers multi-
ple banks of outputs that can each be tied to independent voltages, enabling usage in
mixed-supply applications. Further, the signal format of each clock output is user-config-
urable. Given its frequency, format, and supply voltage flexibility, the Si5332 is ideally
suited to replace multiple clock ICs and oscillators with a single device.

The Si5332 is quickly and easily configured using ClockBuilder Pro

™

software. Clock-

Builder Pro assigns a custom part number for each unique configuration. Devices
ordered with custom part numbers are factory-programmed free of charge, making it
easy to get a custom clock uniquely tailored for each application. Using the Si5332's I2C
interface, the device may be user-configured at power-up or internally-configured NVM
programmed with new configuration using the ClockBuilder Pro Field Programmer.

Applications:

• Servers, Storage, Search Acceleration
• Ethernet Switches, Routers
• Small Cells, Mobile Backhaul/Fronthaul
• Print Imaging

• Communications
• Broadcast Video
• Test and Measurement
• Industrial, Embedded Computing

KEY FEATURES

• Any-Frequency 6/8/12-output

programmable clock generators

• Offered in three different package sizes,

supporting different combinations of output
clocks and user configurable hardware
input pins

• 32-pin, up to 6 outputs
• 40-pin, up to 8 outputs
• 48-pin, up to 12 outputs

• MultiSynth technology enables any-

frequency synthesis on any output up to
250 MHz

• Highly configurable output path featuring a

cross point mux

• Up to three independent fractional

synthesis output paths

• Up to five independent integer dividers

• Embedded 50 MHz crystal option
• Input frequency range:

• External crystal: 16 to 50 MHz
• Differential clock: 10 to 250 MHz
• LVCMOS clock: 10 to 170 MHz

• Output frequency range:

• Differential: 5 to 333.33 MHz
• LVCMOS: 5 to 170 MHz

• User-configurable clock output signal

format per output: LVDS, LVPECL, HCSL,
LVCMOS

• Multi-profile configuration support
• Temperature range: –40 to +85 °C
• Down and center spread spectrum
• RoHS-6 compliant
•

Si5332 Family Reference Manual

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

1

Rev. 1.3 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 16, 2021

1

1
2
3
...
»

Summary of Contents for Si5332











































































Reviews:

No comments

Related manuals for Si5332

Brand: Magnavox Pages: 2

Brand: Fender Pages: 12

Brand: East Tester Pages: 16

Brand: Shindaiwa Pages: 52

Brand: Quantum Pages: 2

Brand: OWI Pages: 1

Hard Gear SGE3500BSi

Brand: DAISHIN Pages: 28

Brand: Laser Pages: 20

Watchman FDL-22

Brand: Sony Pages: 4

Brand: Denyo Pages: 47

Brand: Denver Pages: 4

Brand: Denver Pages: 43

Brand: Denver Pages: 144

Brand: Honda Pages: 96

Brand: Medion Pages: 79

Brand: SELF Pages: 3

Brand: PERFECTPRO Pages: 96

Brand: IHS Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands