manualshive.com logo in svg

Skyworks Si5332, Manual

Share
Download
Skyworks Si5332 Manual Download Page 19

3.10  In-Circuit Programming

The Si5332 is in-system configurable using the I

2

C interface by the following two methods:

•

In-ciruit configuration of device registers after power-up. 

With this method changes to volatile register memory can be done as re-

quired to produce the desired outputs. This does not alter internal NVM; therefore, register memory changes are lost at power-down.
Refer to the 

Si5332 Family Reference Manual

 available on our web site for details.

•

In-circuit re-configuration of internal NVM.

 Writing to internal NVM requires the use of the CBPro Field Programmer (CBPROG-DON-

GLE)  and  CBPro  software.  See 

UG286:  ClockBuilderPro  Field  Programmer  Kit

  user's  guide  available  on  our  web  site  for  more

information.  (One  important  note:  The  Si5332  core  VDDs  (VDD_DIG,  VDDA,  and  VDD_XTAL)  must  be  powered  by  3.3  V  during
in-circuit NVM programming.)

• VDD core voltages (VDD_DIG, VDDA, VDD_XTAL) must be 3.3 V for in-circuit programming. Using VDD core voltage lower than 3.3

V (i.e., 2.5 V or 1.8 V) will not support reliable in-circuit NVM programming.

Si5332 Data Sheet • Functional Description

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

19

Rev. 1.3 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 16, 2021

19

Summary of Contents for Si5332











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands