manualshive.com logo in svg

Skyworks Si5332, Manual

Share
Download
Skyworks Si5332 Manual Download Page 31

Parameter

Symbol

Test Condition

Typ

Max

Units

Notes:

1. INT jitter generation test conditions f

OUT

 = 156.25 MHz LVPECL.

2. Integer mode assumes that the output dividers (Nn/Nd) are configured with an integer value.
3. Fractional and DCO modes assume that the output dividers (Nn/Nd) are configured with a fractional value and the feedback

divider is integer.

4. All jitter data in this table is based upon all output formats being differential. When LVCMOS outputs are used, there is the

potential that the output jitter may increase due to the nature of LVCMOS outputs. If your configuration implements any LVCMOS
output and any output is required to have jitter less than 3 ps RMS, contact Skyworks for support to validate your configuration
and ensure the best jitter performance.

5. FRAC jitter generation test conditions f

OUT

 = 150 MHz LVPECL.

6. Measured at 156.25 MHz carrier frequency. Carrier power of -1.5 dBm. 100 mVpp sine wave noise added and noise spur

amplitude measured..

Si5332 Data Sheet • Electrical Specifications

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

31

Rev. 1.3 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 16, 2021

31

Summary of Contents for Si5332











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands