manualshive.com logo in svg

Skyworks Si5332, Manual

Share
Download
Skyworks Si5332 Manual Download Page 49

Pin Number

Pin Name

Pin Type

Function

17

INPUT2

I

Universal HW Input pin. This hardware input pin is user definable through
ClockBuilder Pro. Refer to Section 

3.7 Universal Hardware Input Pins

 for a

list of definitions that hardware input pins can be used for.

18

OUT2b

O

Output Clock

These output clocks support a programmable signal swing and common
mode voltage. Desired output signal format is configurable using register
control. Termination recommendations are provided in 

3.5.2 Differential Out-

put Terminations

 and 

3.5.3 LVCMOS Output Terminations

. Unused outputs

should be left unconnected.

19

OUT2

O

20

VDDO2

P

Supply Voltage (1.8–3.3 V, or 1.5 V for CMOS only) for OUT2

See the 

Si5332 Family Reference Manual

 for power supply filtering recom-

mendations.

Leave VDDOx pins of unused output drivers unconnected. An alternate
option is to connect the VDDOx pin to a power supply and disable the
output driver to minimize current consumption.

21

OUT3b

O

Output Clock

These output clocks support a programmable signal swing and common
mode voltage. Desired output signal format is configurable using register
control. Termination recommendations are provided in 

3.5.2 Differential Out-

put Terminations

 and 

3.5.3 LVCMOS Output Terminations

. Unused outputs

should be left unconnected.

22

OUT3

O

23

VDDO3

P

Supply Voltage (1.8–3.3 V, or 1.5 V for CMOS only) for OUT3

See the 

Si5332 Family Reference Manual

 for power supply filtering recom-

mendations.

Leave VDDOx pins of unused output drivers unconnected. An alternate
option is to connect the VDDOx pin to a power supply and disable the
output driver to minimize current consumption.

24

INPUT3

I

Universal HW Input pin. This hardware input pin is user definable through
ClockBuilder Pro. Refer to Section 

3.7 Universal Hardware Input Pins

 for a

list of definitions that hardware input pins can be used for.

25

VDDO4

P

Supply Voltage (1.8–3.3 V, or 1.5 V for CMOS only) for OUT4

See the 

Si5332 Family Reference Manual

 for power supply filtering recom-

mendations.

Leave VDDOx pins of unused output drivers unconnected. An alternate
option is to connect the VDDOx pin to a power supply and disable the
output driver to minimize current consumption.

26

OUT4b

O

Output Clock

These output clocks support a programmable signal swing and common
mode voltage. Desired output signal format is configurable using register
control. Termination recommendations are provided in 

3.5.2 Differential Out-

put Terminations

 and 

3.5.3 LVCMOS Output Terminations

. Unused outputs

should be left unconnected.

27

OUT4

O

28

INPUT4

I

Universal HW Input pin. This hardware input pin is user definable through
ClockBuilder Pro. Refer to Section 

3.7 Universal Hardware Input Pins

 for a

list of definitions that hardware input pins can be used for.

29

INPUT5

I

Universal HW Input pin. This hardware input pin is user definable through
ClockBuilder Pro. Refer to Section 

3.7 Universal Hardware Input Pins

 for a

list of definitions that hardware input pins can be used for.

Si5332 Data Sheet • Pin Descriptions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

49

Rev. 1.3 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 16, 2021

49

Summary of Contents for Si5332











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands