manualshive.com logo in svg

Skyworks Si5332, Manual

The Skyworks Si5332 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information to help you maximize the usage of your Si5332 product. Visit manualshive.com today and easily access the manual for your convenience.

Share
Download
background image

Output Frequency Select Pins

There are five integer dividers, one corresponding to each of the five output banks. Using ClockBuilder Pro, a universal hardware input
pin can be assigned for each integer divider, providing capability to select between two different pre-programmed divide values. Divider
values of every integer from 8 to 255 are available in ClockBuilder Pro for each integer divider.

Table 3.4.  F

S_INT

 Pin Selection Table

F

S_INTx

Output Frequency from INTx

0

Frequency A, as defined in ClockBuilder Pro

1

Frequency B, as defined in ClockBuilder Pro

Output Enable

A universal hardware input pin can be defined to control output enable of a differential output, a bank of differential outputs, or as a
global output enable pin controlling all outputs. Upon de-assertion of an OE pin, the corresponding output will be disabled within 2-6
clock cycles. Asserting an OE pin from disable to enable will take <20 µs for the output to have a clean clock.

Output enabled/disabled for LVCMOS are done in pairs. Each differential buffer True and Compliment output can generate an LVCMOS
clock and the OE pin associated with the True and Compliment output buffer will control the respective LVCMOS pair.

For example: If DIFF0 is configured to be SE1 and DIFF0# is configured to be SE2 and OE1 is the associated OE pin, de-asserting the
OE1 pin will disable both SE1 and SE2 outputs. The disable and enable of the outputs to a known state is glitch free.

I2C Address Pin

This pin sets the LSB of the I2C address. For example, if the I2C address is A6h, setting this pin high will set the I2C address to A7h.

CLKIN_SEL[0:1] Pins

These  pins  are  used  to  set  the  input  source  clock  between  the  input  clock  channels  (Crystal,  CLKIN_2/CLKIN_2#  or  CLKIN_3/
CLKIN_3#). Upon switching the input clock source, the output will not be glitch free. It is intended for the user to set this pin to a known
state before the system is powered up or have the receiver address any unintended output signals when switching to a different input
source clock.

Multi-Profile

Si5332  has  the  ability  to  store  multiple  unique  configurations  in  the  same  custom  part  number  by  enabling  multi-profile  support  in
ClockBuilder Pro after selecting the desired Si5332 device. The ClockBuilder Pro wizard guides users to enter the input/output/feature
set  needed  for  each  individual  profile  configuration,  then  compiles  them  together  and  assigns  the  necessary  number  of  universal
hardware pins based on the number of profiles entered.

The actual number of profiles supported in a particular design is limited by overall design complexity and NVM size. ClockBuilder Pro
automatically determines the NVM size required for your multi-profile design and will warn if the maximum limit is exceeded.

3.8  Custom Factory Preprogrammed Parts

Custom  pre-programmed  parts  can  be  ordered  corresponding  to  a  specific  configuration  file  generated  using  the  ClockBuilder  Pro
software utility. Skyworks writes the configuration file into the device prior to shipping. Use the 

ClockBuilder Pro

 custom part number

wizard to quickly and easily generate a custom part number for your ClockBuilder Pro configuration file. A factory pre-programmed part
will generate clocks at power-up.

In  less  than  three  minutes,  you  will  be  able  to  generate  a  custom  part  number  with  a  detailed  data  sheet  addendum  matching  your
design’s configuration. Once you receive the confirmation email with the data sheet addendum, simply place an order with your local
Skyworks sales representative. Samples of your pre-programmed device will ship within two weeks.

3.9  I2C Serial Interface

The Si5332 is compatible with rev6 of the I2C specification, including Standard, Fast, and Fast+ modes.

Configuration and operation of the Si5332 can be controlled by reading and writing registers using the I

2

C . Communication with a 1.8 V

to 3.3 V host is supported. See the 

Si5332 Family Reference Manual

 for details.

Si5332 Data Sheet • Functional Description

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com

18

Rev. 1.3 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 16, 2021

18

Summary of Contents for Si5332











































































Reviews:

No comments

Related manuals for Si5332

Makita G12010R Parts Breakdown preview
G12010R
Brand: Makita Pages: 21
Westinghouse Gen9500DF User Manual preview
Gen9500DF
Brand: Westinghouse Pages: 100
Olin PD707B User Manual preview
PD707B
Brand: Olin Pages: 26
Lamborghini Caloreclima ERA F 30 B 60 Instructions Manual preview
ERA F 30 B 60
Brand: Lamborghini Caloreclima Pages: 112
Westinghouse WGen12000DFc User Manual preview
WGen12000DFc
Brand: Westinghouse Pages: 103
Denver DFT-714M User Manual preview
DFT-714M
Brand: Denver Pages: 15
Joy-it JT-PSG9080 Flash Manual preview
JT-PSG9080
Brand: Joy-it Pages: 5
Master Quality Power XFG2000 Owner'S Manual preview
XFG2000
Brand: Master Quality Power Pages: 15
Sencor SPT-229 User Manual preview
SPT-229
Brand: Sencor Pages: 10
Subaru RG3200iS Instructions For Use Manual preview
RG3200iS
Brand: Subaru Pages: 28
QFX PBX-BF25 User Manual preview
PBX-BF25
Brand: QFX Pages: 3
Kenwood TK-3200L Service Manual preview
TK-3200L
Brand: Kenwood Pages: 36
Kenwood TK-3140 Service Manual preview
TK-3140
Brand: Kenwood Pages: 47
Kenwood TK-3160 Service Manual preview
TK-3160
Brand: Kenwood Pages: 60
Kenwood TK-3180 Instruction Manual preview
TK-3180
Brand: Kenwood Pages: 10
Kenwood TK-3140 Instruction Manual preview
TK-3140
Brand: Kenwood Pages: 33
Kenwood TK-3170 Service Manual preview
TK-3170
Brand: Kenwood Pages: 73
Kenwood TK-3180 Service Manual preview
TK-3180
Brand: Kenwood Pages: 70

Brands by name

Popular brands

Load more brands