31
Note
The testing environment must between 18
0
C to 28
0
C
to ensure accuracy especially when measuring low
temperature.
Different reading may be obtained when testing room
environment under short or open circuit situation,
then short-circuited reading shall be considered as
the correct reading.
The included point contact temperature probe can
only be used under 230
0
C. For any measurement
higher than that, the rod type temperature probe
must be used instead.
Model 72-1016: OPERATING MANUAL
When temperature measurement has been
completed, disconnect the connection between the
temperature probe, multi-purpose socket and the
circuit under test, and remove the temperature probe
from the input terminals of the multi-purpose socket,
and remove the multi-purpose socket from the input
terminals of the Meter.
l
l
l
l
This Manual: http://www.manuallib.com/file/2587080