Quark-Elec QK-A035 Manual Download

Page: 1 / 19

QK-A035 Manual

V 1.0

1 of 19

2021

QK-A035 Manual

NMEA 0183 4x4 Multiplexer with SeaTalk

Converter

and

Integrated Voyage Data Logger

Features



Multiplex up to 4 NMEA 0183 inputs and SeaTalk¹ devices



Configurable baud rates (4800, 9600, 38400bps)



Simultaneous WiFi, USB and NMEA output



Galvanically isolated NMEA and SeaTalk¹ input ports



Bi-directional USB/WiFi interface enables connection between navigation devices and autopilot



WiFi

– Ad-hoc mode allows up to 4 devices to connect to the internal WiFi module simultaneously



WiFi

– Station mode allows for the connection of the A035 to your router/ access point for greater

number of wireless users and WiFi range



Compatible with Windows, Mac, Linux (configuration tool is only windows compatible)



Compatible with Android and iOS excluding configuration and USB functions. (Please note

configuration must be done using Windows software)



Advanced filtering and routing functions allow for full overflow reduction and additional

configuration of the multiplexer



Automatic data recording on an SD card that offers tracking, data backup, sharing and export



Monitoring of NMEA data passing through the device

Summary of Contents for QK-A035




















Search results

Summary of Contents for QK-A035

Reviews:

Related manuals for QK-A035

Brands by name

Popular brands

Quark-Elec QK-A035, Manual

Search results

Summary of Contents for QK-A035

Reviews:

Related manuals for QK-A035

Brands by name

Popular brands