background image

- 1 -

DMM-5T-2

Multifunctional three-

-phase multimeter

The DMM-5T-2 is a multifunctional, universal panel indicator 

designed for versatile monitoring of parameters of a single- or 

three-phase power supply line. The multimeter allows for high 

accuracy measurements of all relevant network parameters, 

such as phase voltages and currents, phase-to-phase voltages, 

active, reactive, apparent power, power factor. In addition, the 

multimeter provides a full four-quadrant measurement of ener-

gy (both imported and exported) and analyses the distribution of 

voltage and current harmonics up to and including 63-harmonic.

Purpose

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and 

can give any amount to up to that end point of collection, as well as to store the occa

-

sion of the purchase of new equipment (in accordance with the principle of old-for-

new, regardless of brand). Electro thrown in the trash or abandoned in nature, pose 

a threat to the environment and human health.

Summary of Contents for DMM-5T-2

















Reviews: