Temptek G-500 Series, Instruction Manual

Page: 4 / 64

Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 4
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
TABLE OF CONTENTS
1.0 GENERAL 7
1.1 Receiving Instructions 8
1.2 Introduction 8
1.3 Safety 8
1.4 Components 10
2.0 INSTALLATION 13
2.1 General 14
2.2 To and from process connections 14
2.3 Water supply connection 15
2.4 Drain connection 15
2.5 Electrical connection 17
3.0 START UP SEQUENCE 19
3.1 General 20
3.2 System Fill / Operations 20
3.3 Instrument : Quick Start 24
3.4 Instrument : Basic Navigation 25
3.5 Instrument : Operating Screens 26
3.6 Instrument : Fault Screens 27
3.7 Instrument : Main Menu 28
3.8 Instrument : Setpoints Menu 28
3.9 Instrument : Utilities Menu 29
3.10 Instrument : Network Menu 30
3.11 Instrument : Options Menu 32
3.12 Instrument : Machine Menu 32
3.13 Shut Down / Disconnect 33
4.0 TROUBLESHOOTING 35
4.1 Unit will not start (
Display is not Illuminated
) 36
4.2 Unit will not start ( Display is Illuminated ) 36
4.3 Unit Stops 36
4.4 Unit Overheats 37
4.5 Unit Underheats 38
4.6 Pressure Relief Valve Leaks 38
5.0 MAINTENANCE 41
5.1 Preventative Maintenance 42
5.1 Pump Seal Replacement 43
5.2 Heater Replacement 45
5.3 Cooling Valve Service 46
5.4 Pressure Switch Service 47
5.5 Electronic Instrument Repair Policy And Procedure 48