Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 28
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: [email protected]
3.7 INSTRUMENT : MAIN MENU
A.
The Main Menu offers the ability to set and change values in the following areas:
1. Setpoints.
2. Utilities.
3. Network.
4. Features.
5. Machine.
B.
The Main Menu is accessible from the Standby screen by pressing the Go button.
C.
The Main Menu is also accessible from any Operating screen by pressing the Go button.
In the example below, while on the Cooling screen, pressing the Select button will
advance to the Main Menu.
3.8 INSTRUMENT : SETPOINTS MENU
A.
Under the Setpoints menu item, the values for the Process Setpoint, Hi Deviation, Low
Deviation can be set or changed.
B.
Process Setpoint. Use the Up or Down buttons to change the process setpoint.
1.
The Setpoint range is from 100°F to 500°F. Please note, the unit can not reduce
process temperature below the provided water supply temperature.
2.
Once acknowledged, the unit will control to the new setpoint temperature. Press
the Back button repeatedly to return to the Setpoints screen or press the home
button to return to the Home screen.
Setpoints
Utilites
Network
Features
Machine
Back
Pick
Go
Main Menu
Setpoint
Status
Ready
500°F
Standby
Setpoints
Utilites
Network
Features
Machine
Back
Pick
Go
Main Menu
Setpoint: 500°F
Heating: 100%
To Process
101°F
Setpoints
Hi Deviation
Lo Deviation
Process Setpoint
Back
Pick
Go
Process Setpoint
500°F
Cancel
Adjust
OK
Change Setting
Process Setpoint
Success
Acknowledge
Summary of Contents for G-500 Series
