Temptek G-500 Series, Instruction Manual

Page: 30 / 64

Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 30
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
1. Select the Software Version item from the Utilities Menu to advance to the
software version screen.
2. Press the Back button to return to the Utilities menu.
C. Display Test. The Display Test will test the entire for bad pixels or sectors.
1. Select the Display Test item from the Utilities Menu to advance to the Display
Test screen.
2. The test will show a blank screen. If any bad pixels or sectors are detected, those
pixels or sectors will be dark. If dark pixels or sectors are indicated, contact the
factory repair or replacement options.
D. Display Sensors. Not active on this unit
3.10 INSTRUMENT : NETWORK MENU
A. Items in the Network menu include Protocol, Address and Baud Rate
B. Protocol: This is the data format for communication between the unit and the host
computer. Available values are
• SPI CCP
• Modbus RTU
• CAMAC.
Network
Baud Rate
Address
Protocol
Back Pick Go
Setpoints
Utilites
Network
Features
Machine
Back Pick Go
Main Menu
Setpoints
Utilites
Network
Features
Machine
Back Pick Go
Main Menu
Setpoints
Utilites
Network
Features
Machine
Back Pick Go
Main Menu
Setpoints
Utilites
Network
Features
Machine
Back Pick Go
Main Menu
Utilities
Display Test
Display Sersors
Software Version
Back Pick Go
Utilities
Display Test
Display Sersors
Software Version
Back Pick Go
Sensor Display
To Process:
037.7°C (100°F)
Cold Junction:
033.5°C (92°F)
Network
Baud Rate
Address
Protocol
Back Pick Go
Protocol
SPI CCP
Modbus RTU
CAMAC
Cancel
Adjust OK
Change Setting
Protocol
Success
Acknowledge