Temptek G-500 Series, Instruction Manual

Page: 25 / 64

Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 25
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
5. The unit is ready to start when no errors are shown on the screen. Press the green start
button.
6. The unit will heat or cool to maintain the setpoint temperature.
3.4 INSTRUMENT : BASIC NAVIGATION
A. The instrument has 5 soft keyed buttons.
1. The Home button, when pressed , shows the Home
screen.
2. The Up button, when pressed, will add one unit of
value or will scroll up through a menu.
3. The Down button, when pressed, will subtract one
unit of value or will scroll down through a menu.
4. The Go button, when pressed, will advanced
through a series of screens or save a value.
5. The Back button, when pressed will go backwards
through a series of screens.
B. Prompts on Selection Screens. Selection screens display a
menu of selectable items.
1. The Up button will scroll up through the menu items.
The screen indicators will scroll along with the
pressing of the button.
2. The Down button will scroll down through the menu
items. The screen indicators will scroll along with the
pressing of the button.
3. The Go button will advance to the value screen of the
selected parameter.
4. The Back button will return to the previous screen.
Successive pressing of the Back button will
eventually end at the Home screen.
C. Prompts on Value Screens. Value screens allow the user to
set or change parameter values.
1. The Up button will add to the value of the parameter.
Setpoint Status
Ready 100°F
Standby
To Process
Setpoint : 100°F
Heating : 100%
75°F
Go
Up
Back
Down
Home