Temptek G-500 Series, Instruction Manual

Page: 33 / 64

Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 33
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
(°F) or Metric(°C).
1. Use the Up or Down arrow keys to select the Unit display and then press the
Select button to save and confirm success.
2. The factory default value is English.
D. Heat Only Mode. This limits the unit to only the Heat Mode. This feature is useful when
the unit has an installed heat exchanger for cooling.
1. Use the Up or Down arrow keys to select the Heat Only Mode and then press the
Select button to save and confirm success.
2. The factory default value is Disabled.
3.14 SHUT DOWN - DISCONNECT
A. UNIT SHUT DOWN
1. Decrease the setpoint temperature lower than 100°F and allow the unit to cool to
the temperature.
2. Press the stop button.
3. Relieve residual static pressure before disconnecting or servicing the unit.
4. Follow all lock-out tag-out requirements.
5. Confirm that no voltage is going to the unit heater.
Machine
Back Pick Go
Max. Setpoint
Heat Only Mode
Units
Heat Only Mode
Cancel
Adjust OK
Enable
Disable
Change Setting
Heat Only Mode
Success
Acknowledge