Temptek G-500 Series, Instruction Manual

Page: 32 / 64

Temperature Control Unit : VTO Series with G500 Series Instrument
Page: 32
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
C. Remote Start (optional features not included on all units) :
1. Select Remote Start from the Options menu.
2. Advance to the Remote Start Enable / Disable scree. Select Enabled to enable
the remote start feature. Select Disabled to disable the feature. Refer to Section
8.4 for more information.
3. Once acknowledged, press the Back button repeatedly to return to the Options
screen or press the home button to return to the Home screen.
3.12 INSTRUMENT : MACHINE MENU
A. The Machine Menu allows the units to set values for the Max Setpoint, Units and Heat
Only Mode.
B. Max Setpoint. This feature is useful in some application where the setpoint must never
be changed above a certain temperature. The Maximum Setpoint can never exceed
500°F in the unit.
1. Use the Up or Down arrow keys to select the Max Setpoint and then press the
Select button to save and confirm success.
2. The value range for the Max Setpoint is 100°F to 500°F. The factory default is
500°F.
C. Units. This screen controls how the temperature is displayed. The options are English
Options
Remote Start
Back Pick Go
Remote Start
Cancel Adjust OK
Enabled
Disabled
Change Setting
Remote Start
Success
Acknowledge
Setpoints
Utilites
Network
Options
Machine
Back Pick Go
Main Menu
Setpoints
Utilites
Network
Options
Machine
Back Pick Go
Main Menu
Setpoints
Utilites
Network
Back Pick Go
Main Menu
Machine
Max. Setpoint
Heat Only Mode
Units
Back Pick Go
Machine
Max. Setpoint
Heat Only Mode
Units
Back Pick Go
Max. Setpoint
Cancel
Adjust OK
500°F
Change Setting
Max. Setpoint
Success
Acknowledge
Machine
Back Pick Go
Max. Setpoint
Heat Only Mode
Units
Units
Cancel
Adjust OK
English
Metric
Change Setting
Units
Success
Acknowledge